Casella CEL-352 dBadge Manuel d'instructions télécharger pdf (Page 12)

Casella CEL-35X dBadge Users Handbook – Page 12

5 GENERAL OPERATION

5.1 Switching on the dBadge

Once the instrument is switched on by pressing the ‘L’ key, it will

display a start up sequence, shown in Figure 8. This displays the

dBadge model number and firmware version (e.g. V1.07), followed

by the ‘Custom Text’ screen. This text can be configured using the

dB35 software (optional, refer to dB35 manual). The screen will

then change to the current time and date. This will automatically

be set to the internal clock of the PC every time the dBadge is

downloaded to dB35 software.

Figure 8

The next screen shows the remaining battery life and memory as

shown in Figure 9. The caution symbol will be displayed on the

left of the display if remaining memory or battery life are under 2

hours. The next screens show the instantaneous sound pressure

level (SPL) currently being measured by the microphone and the

current clock time set within the instrument.

CASELLA

CeL- 350

V1.01

JOE BLOGGS

CONSULTANTS

23 JUL 05

13:45:03

Screen will show CEL-

352 on dBadge ‘Plus’

model

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 40 41

Pas de commentaire

Casella CEL-352 dBadge Manuel d'instructions Page 12